ICF Wall
9 Things You Need To Know About Building With Insulating Concrete Forms - BEFORE You Start...

ICF wall is quick to erect
Before selecting and reviewing your plans you should know the following:
1. Insulating Concrete Form Walls (in most cases) are wider than your wood framed walls.
Because of this most of the outside dimensions on your plans will change by 4 to 6 inches. (Occasionally dimension changes are needed for the
front entry door in order to allow it to fit properly between the thicker walls when building with ICFs).
2. How does the second floor relate to the first? – If they are not directly on top of each
other, special reinforcing of the structure may be required. The most ICF friendly house plans are the ones where floors are on top of each other
exactly, due to load bearing points.
3. Dimensions of length of the concrete walls should be multiples of 8 inches (in most cases).
This is due to webs being 8 inches apart from each other and therefore there is less waste when cutting.
4. Windows heights should correspond to the height of the blocks. For example if the ICF block
is 16 inches high, window heights should be in multiples of 16 to fit in between the blocks.
5. Look at window sizes. Family rooms often have most of their outside walls covered with
windows and small pillars in between the windows. You may have to look at some options that allow for wider columns of concrete between
openings.
6. Locations of windows and doors – Are the lintel depths and spans O.K.?
7. Check the tubs. Again, because of the thicker ICF walls, adjustments are required where the
tub is meant to fit between the two exterior 2 x 4 or 2x6 stud walls.
8. Are there any bay windows? - The thicker ICF walls may make downsizing of the windows
necessary.
9. The location of the dryer vent, electrical service, meter locations and any other openings to the
outside walls have to be marked on the plans. The location should be decided ahead of time because once the concrete is poured, it is
very difficult to construct the required openings. The location of the Heat Recovery Ventilator also has to be decided ahead of time. Making 8”
holes through rebar reinforced concrete is a tough task after the fact.
Building with ICFs:
When building with Insulating Concrete Forms, an experienced ICF builder, can offer his client options - to
build the entire home from beginning to end, or to only build the shell from ICFs.
Often clients come to us with plans that they have pre-selected. They are concerned whether their plans are
suitable for building with ICFs. Can it be built with ICF’s? This is where only an experienced ICF builder can offer solid advice for all aspects
of building ICF homes.
Every home can be built with ICFs, but some styles of homes are better suited, and allow ICFs to perform at
their optimum.
Before making the decision to build with ICFs the homeowner should take the time to review the entire plan of
the home with an experienced ICF builder. Together they can match the benefits of ICFs with the plan and the rest of the construction process and
materials. A professional can take a quick look at your plans to see if there are any design issues that would result in building with Insulating
Concrete Forms to be too expensive or difficult. He can then suggest appropriate changes, if required.
It is a fact that most potential ICF customers do quite a bit of research prior to deciding to build with ICF.
We all know the numerous benefits of this type of building – energy efficiency, strength, sound reduction, water proof, fire resistant, mold
resistant, cleaner air, etc. However, if your builder is not experienced, the potential problems and expenses can also be numerous.
Once you know what you are doing, building the walls is the easy part – the hard part is making sure all the
“pre-work” and decision making has been done in order not to cause major delays and expenses for the homeowner, and frustration for both the
builder and the homeowner!
See "The Anathomy of an ICF
wall". More Articles on ICF Wall:
|